Unscrew the coffee pot: hold the cup rest and, without putting pressure on the column, turn it anti-clockwise until it is completely separated from the boiler.
Fill the boiler with cold water, without the level exceeding the safety valve hole.
Insert the funnel filter into the boiler.
Fill the funnel filter with ground coffee, without pressing it, taking care not to leave coffee powder on the edge of the boiler.
Screw the coffee maker together: hold the cup rest and, without putting pressure on the column, turn it clockwise until it fits completely into the boiler.
Tighten firmly to prevent the risk of steam/coffee leakage during dispensing.
Put the coffee maker on the heat source, with the cups under the column on the cup rest; if it is a flame, keep it low to ensure it does not protrude from the edge of the boiler.
In the case of an electric/glass ceramic hob, do not use the maximum intensity.
Body material: aluminium
Easy-clean safety valve
Not suitable for use on an induction hob
Not dishwasher safe